User manual

www.elationlighting.com!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!5U!!!!!!!!!!!!!!!!!!#!$%&'!(#)!**+!,-./!012314!567
FIXTURE MENU
ON-BOARD SYSTEM MENU
The E SPOT LED II™ comes with an easy to navigate system menu. The next section will
detail the functions of each command in the system menu.
MENU FUNCTION DISPLAY
The control panel located on the base of the fixture allows you to access the main menu and
make all necessary adjustments to the E SPOT LED II™. During normal operation, pressing
the MODE/ESC key once will access the fixture’s main menu. Once in the main menu you
can navigate through the different functions and access the sub-menus with the UP and
DOWN buttons. Once you reach a field that requires adjusting, press the ENTER button to
activate that field and use the UP and DOWN buttons to adjust the field. Pressing the
ENTER button once more will confirm your setting. Once a setting is saved the display will
briefly readout OK to confirm a new setting has been made and locked into memory. You
may exit the main menu at any time without making any adjustments by pressing the
MODE/ESC button.