Specifications

ManualsBrandsElation ManualsComputer equipmentRMD-1220

24-004-2355-00

Rev1.0

User Instructions

RMD-1220

It is important to read this instruction book prior to installing or using your new

roduct for the first time.

Rack Mount Dimmer-12Channel

Summary of content (12 pages)

PAGE 1
User Instructions RMD-1220 Rack Mount Dimmer-12Channel 24-004-2355-00 Rev1.0 It is important to read this instruction book prior to installing or using your new product for the first time.
PAGE 2
Contents Contents Operation Guide 7) SETUP Important Safety Introductions.................................................1 For Your Safety Caution General Introduction...................................................................2 22. Secondly tap ENTER button to release all parameter to default or use ESC button exit without record. Factory Default Confirm ESC MENU ENTER Features Physical Dimensions Technical Specifications............................................................
PAGE 3
Operation Guide Important Safety Instructions For Your Safety 7) SETUP 16. Use >> button to select and tap ENTER button to enter FAN COOLING menu. This menu allow you to control how the internal cooling fans operate. The menu gives you a choice of Normal, Full On and Silent. FAN COOL[Normal] Normal ESC MENU ENTER Never open this product under any circumstances. Any repairs or internal adjustments should be made only by a trained technician.
PAGE 4
Operation Guide General Instructions Thanks for you purchasing Botex RMD-1220 Rack Mount Dimmer. RMD-1220 is designed to build and expand your lighting control console.It is compact, portable and easy to operate by menus.
PAGE 5
Operation Guide Technical Specification Power Requirements 7) SETUP Voltage: 120V AC Frequency: 60Hz 7. Use >> button to select and tap ENTER button to enter ArtNET Failed menu. This menu contains ArtNET Failed Off, Hold, Off After 10min, ArtNET fail DMX and GoScene##. All RMD-1220 Rack Mount Dimmers must be grounded for safety use. ArtNET Failed Off ESC MENU Dimming Capacity Each pack contains twelve dimmers each with a Maximum load of 20A(4.6kW) per dimmer-total 55.2kW per dimmer pack.
PAGE 6
Operation Guide Overview Front View 7) SETUP 12 Rack Mount Dimmer - 12 channel, 20 Amps per channel This menu is to select what action the dimmer pack shoud follow. There are 5 modes available in this menu----- Protocol Assign, ArtNET Failed,DMX Failed, Fan Cooling and Default. 11 MENU SETUP Protocol Assign ESC ENTER 8 9 10 11 1. Tap UP/DOWN to scroll SETUP menu. 7 ESC 2. Tap >> button to select the mode you want enter in. ENTER Protocol Assign 3.
PAGE 7
Operation Guide Overview Front View 6) CURVES This menu is used to select a dimmer curve for any or all the dimmer in system. There are 3 dimmer curves available to choice from L-Linear, S-Square and N-NO-DIM. 1. 2x16 LCD Display Shows the current activities or adjustments of menus. 1. Tap UP/DOWN button to scroll to CURVES menu. CURVES CH: ESC MENU 2. DMX LED Indicator This LED blinks when DMX signal is present. 3. POWER LED Indicator ENTER This LED will light when power source is connected.
PAGE 8
Operation Guide Overview 5) PLAY SCENE Rear View 6. Tap UP/DOWN button to scroll the scene display mode(Once or Loop), Fade time(Fad1s,from 1s~10s) and the last scene(E01~E99). 2 12 OUT 11 10 9 7 8 6 5 4 3 2 E L N E L N E L N E L N E L N E L N E L N E L N E L N E L N E L N E L Fad1s E99 Sc01 N PIN 1: Ground PIN 2: Data PIN 3: Data + PIN 4,5: NC ESC 1 ESC MENU ENTER 1 -5- IN Fad1s E99 Sc01 4 MENU ENTER 3 7.
PAGE 9
Overview Operation Guide 5) PLAY SCENE Main power & Output Termination 1. Tap UP/DOWN button scroll to PLAY SCENE menu to perform scene out. MENU PLAY SCENE Scene ESC ENTER ESC Fad1s E99 Sc01 ESC ESC ENTER 2. In this menu, there are 2 sub-menus, Chase and Scene. You can tap >> button to select the sub-menu you want to enter in. 3. Tap ENTER button to enter Chase. Fad1s E99 Sc01 MENU PLAY SCENE Chase MENU ENTER MENU ENTER 4. Tap UP/DOWN to scroll Scene number.
PAGE 10
Operation Guide Operation Guide Menus 4) Scenes REC There are 8 menus for RMD-1220: 1)Home(Live Display) 2)LOCAL CONTROL 3)ADDRESS, 4)SCENE REC 5)PLAY SCENE 6)CURVES 7)SETUP 8) INFORMATION. 6.Tap ESC BACK Step 1 and use >> button to select Assign sub-menu, tap ENTER button enter in. SCENE: [Copy] Scene07:ENTER ESC MENU ESC ENTER 7. Tap >> button to move cursor to next channel. 1)Home (Live Display) Power on this unit, the POWER led will be lit and the LCD shows "Initialize...
PAGE 11
Operation Guide Operation Guide 4) Scenes REC 2) LOCAL CONTROL 1. Tap UP/DOWN button to scroll to SCENES REC menu. SCENE REC Copy ESC SCENE REC Assign ESC MENU MENU Local Control menu is to set the output level for the selected dimmers. ENTER LOCAL COTROL00% LIVE 123456789012 2. Tap >> button to swap sub-menu between Copy and Assign. MENU SCENE: [Copy] Scene01:ENTER ESC 4. Tap >> button move cursor to blinking "ENTER" and ready to record.
PAGE 12
Operation Guide Operation Guide 3) Address 3) Address This menu is used to set either the DMX512 start address or ArtNET address(SubNET and Universe are available). MENU ADDRESS DMX-512A 1. Tap UP/DOWN button to scroll to 7. Tap ENTER button to save your set in memory. Then tap ESC button back to step 2, use >> button select ArtNET sub-menu,tap ENTER button to enter in. ADDRESS menu. ESC ADDRESS ArtNET ESC ENTER MENU ADDRESS ArtNET MENU ESC 2.