User manual

Power Spot 575IE™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 23
REG
constantly monitors the internal operating temperature and regulates
the fan speed to coincide with the internal temperature.
LOOF
This function is designed for environments that require low ambient
noise. In this setting the fan will operate at the lowest speed. When
the maximum internal intolerable operating temperature is reached
the lamp will automatically shut off.
LOHI
In this setting the fan will operate at the lowest speed. When the
maximum internal intolerable operating temperature is reached the
fan will automatically switch from low to high speed.
3.9.8 Adjustments and Calibrations
ADJU
With this function you can adjust and calibrate the positions of the different wheels
and other motors. This feature is reserved for a service technician and is
sometimes required after a service or repair work.
This function requires a service code only available to authorized service
technicians.
Use the Up and Down buttons to select the function that requires calibration and
press the Enter button to confirm the adjustment or the Mode button to cancel
and return to the menu. Use the Up and Down buttons to set the adjustment
values and confirm once more with the Enter button or use the Mode button to
cancel the operation.
Function
Value
Remark
ADJU
CODE
xxxx
Adjustments in the internal setup are code protected
(for authorized persons only).
COLO
-99 - +99
Adjustment of the Color wheel
GOB1
-99 - +99
Adjustment of the Gobo wheel 1
GOB2
-99 - +99
Adjustment of the Gobo wheel 2
SHTR
-99 - +99
Adjustment of the Shutter
PRIS
-99 - +99
Adjustment of the Prism wheel
IRIS
-99 - +99
Adjustment of the Iris
POFS
-99 - +99
Adjustment of the Pan-Offsets
TOFS
-99 - +99
Adjustment of the Tilt-Offsets
CLRE
Adjustments in the internal circuit.
ARES
-99 - +99
Adjust Reset (wheels stand still after the reset)
VTIL
-99 - +99
Software version of Tilt-board