User manual

Power Spot 575IE™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 15
2.8 Fuse Requirements
The POWER SPOT 575IE electronic and lamp systems are protected by two GMA
(5x20mm) external fuses:
Lamp: 250V/8A
Electronics: 250V/1A
The fuse requirements are clearly printed on the side of the fixture.
WARNING:
• Always disconnect main power before changing the fuse!
• Always replace with the exact same type fuse unless otherwise
specified by an authorized Elation® service technician. Replacing with
anything other than the specified fuse can severely damage your fixture
and will void your manufactures warranty.
2.9 Transportation and Handling
The POWER SPOT 575IE ™ comes with two carrying handles built into the base.
Always transport the fixture by these handles. Never lift or carry the POWER SPOT
575IE™ by the yoke (head assembly) this can seriously damage the unit.