User manual

www.elationlighting.com
29 PLATINUM SPOT LED PRO II™ User Manual Ver 2
CLEARING EWDMX TRANSMITTER LINK
• Access the fixture’s main menu and toggle to the “PERSONALITY” menu, then access
the “Wireless DMX” sub menu and select “Clean WDMX Memo” to clear any existing
link between the fixture and a EWDMX Transmitter. The EWDMX indictor on the fixture
will turn solid RED when the link is severed.
• You may also clear the link directly from the EWDMX Transmitter. First, be sure the
fixture(s) is powered ON, and then hold down the configuration button on the WDMX
Transmitter for as least 5 seconds. This will automatically clear the link between the
EWDMX Transmitter and any fixture that is powered ON. All EWDMX indictors will glow
solid RED if the procedure was successful.
EWDMX INDICATORS
RED/GREEN (Rapid Flashing) = Syncing to a EWDMX Transmitter
RED/GREEN (Slow Flashing) = Paired with a EWDMX Transmitter but not receiving a
DMX signal from a controller.
GREEN (Solid) = Paired with a EWDMX Transmitter and receiving DMX data
RED (Solid) = Not paired with a EWDMX Transmitter (FREE)