Specifications

4
2.1.2 Rear panel
AUDIO IN STROBE OUTPUT MADE IN PRC 23-001-2105FOG MAC HIN ECONTROL OUTPUT 1 - 8CONTROL OUTPUT 9 - 16
PIN
CH
1
VCC
2
4
3
3
4
2
5
1
6
8
7
7
8
6
9
5
PIN
CH
1
VCC
2
12
3
11
4
10
5
9
6
16
7
15
8
14
9
13
DC INPUT:
9- 12VDC,5 00 mA
1 2
3 4
5 6
1. CH9-16 outlet: to output signals according to 9-16 channels.
2. CH1-8 outlet: to output signals according to 1-8 channels.
3. Fog machine connector: connects with a fog machine.
4. Audio input: to input audio signals.
5. Strobe output: to output the strobe light signals.
6. DC input: used to plug in an external power supply (9 ~12V DC 500mA).
2.2 Switch Pack(LC-4SP)
2.2.1 switch pack-side view
Channel outlet: One Edison socket per channel, total 4 sockets
2.2.2 switch pack-back view
1. Signal output:
This 9-pin COM connection is used to connect another LC-4SP switch pack to the
controller unit..
2. Signal input:
Used to link the controller unit with LC-4SP switch pack via a specified 9-pin COM
cable.
3. Circuit breaker:
A built-in 15A circuit breaker designed to protect wiring under heavy or overload
conditions.
4. Power input:
AC 120V--60Hz 15A (max), this will also power the controller unit through the 9-pin
COM cable.