Specifications

Design LED 60 TriStrip™
©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com
FADE( )
0-255
Adjust program 4 fade time
STRB( )
0-255
Adjust strobe rate of program 4
SPED( )
0-255
Adjust program 5 speed
FADE( )
0-255
Adjust program 5 fade time
CHS5( )
STRB( )
0-255
Adjust strobe rate of program 5
SPED( )
0-255
Adjust program 6 speed
FADE( )
0-255
Adjust program 6 fade time
CHS6( )
STRB( )
0-255
Adjust strobe rate of program 6
SPED( )
0-255
Adjust program 7 speed
FADE( )
0-255
Adjust program 7 fade time
CHS7( )
STRB( )
0-255
Adjust strobe rate of program 7
SPED( )
0-255
Adjust program 8 speed
FADE( )
0-255
Adjust program 8 fade time
CHS8( )
STRB( )
0-255
Adjust strobe rate of program 8
MAST( )
Assigns fixture as Master unit in Sound Activate mode
CTRL( )
ALON( )
Assigns fixture as Sound Active, Stand Alone
SOND
( )
MIC( )
M-XX( )
Microphone sensitivity adjustment
DIMR( )
MOD1( )
Standard - Fixture will function with a
stepping dimmer rate
MOD2( )
Linear - Fixture will function with a
dimming rate of 0~100%
LODA( )
YES( )
Reset to Fixture to the Factory Default
Settings
OTHR
( )
VER( )
V X.X( )
“X.X’ will represent the fixture’s current
firmware version
Default settings shaded.
Remarks:
1) If the fixture does not receive a DMX signal the menu display will flash repeatedly.
2) SPED: This function is used to adjust the hold time for the scenes in the built-in chase
programs.
3) FADE: This function is used to adjust the fade time between each scene in the built-in
programs.