Specifications

Design LED 12 Brick II ™
©Elation Professional, Los Angeles Ca. 20 www.ElationLighting.com
FADE XXX Adjust speed of fade
STRB XXX Adjust speed of strobe
SPED XXX
A
djust speed of scene
FADE XXX
A
djust speed of fade
CHS7
STRB XXX
A
djust speed of fade
SPED XXX
A
djust speed of scene
FADE XXX
A
djust speed of fade
CHS8
STRB XXX
A
djust speed of fade
MAST Sound-controlled run as Master CTRL
ALON Sound-controlled run in Stand Alone
SOND
MIC M-XX Microphone sensitivity
<DIMR> MOD1 Select standard dimmer
MOD2 Select weak dimmer
<LOAD> yes
Reset to Fixture to the Factory Default
Settings
OTHR
<VER> V X.X Show the version
Remark:
1) If there is no DMX data received in the device, the display will flash.
2) Instruction for the SPED and the FADE function in CHAS:
SPEED: The time one step would stay
FADE: The time that one step altered to next step
Example: we set SPEED ==1second, and FADE ==1second, the 1st step is Red 100% open,
the 2nd step is green 100% open, the 3rd step is Blue 100% open. So, the Chase would
come out as:
1, The Red 100% open and stay for 1second (SPEED)
2, Then Red drop down from 100% to 0%, the same time Green from 0% to 100%, in
1second (FADE)
3, The Green stay 100% for 1second
4, Then Green drop down from 100% to 0%, the same time Blue from 0% to 100%, in
1second (FADE)
5, Blue stay 100% for 1 second.
6, Then Blue drop down from 100% to 0%, the Red come up from 0% to 100%
Repetition operation