User manual

Elation Professional • Los Angeles, CA. Error! Reference source not found. / Error! Reference source not found.) 6
2. SAFETY INSTRUCTIONS
To guarantee a smooth operation, it is necessary to respect the
following rules. The manufacturer of this device will not take
responsibility of damages through any disregard of the
information in this manual. Warranty claims also will be
cancelled in case the system casing is opened.
1. Be sure the fan and the air inlets are clean and not blocked before
attempting operation.
2. It must be assured that the system-head can rotate unhindered throughout
the complete rotating range. A safety distance of at least 0.5 m to any easily
inflammable material (e.g. decoration material) must be adhered.
3. Attention! Don’t touch the device during the operation. This can cause
injuries or damages.
4. The fixture doesn’t contain any maintainable parts. Don’t open it!
5. It is necessary to wait at least 15 minutes after disconnecting the AC before
changing the optical carrier. Pay attention to possibly hot parts of the
system.
6. Never look directly into the beam of light or LEDs. Never use optical
apertures with a distance less than 0.5 m to observe the beam of light. LED
Class 2M. You'll risk a serious injury of your eyes and in particular of your
retina.
Attention: LED Class 2M can cause injuries of your eyes even
without optical instruments in front of them or within a distance
of less than 0.5m and short exposure time.
Avoid direct radiation of your eyes!
7. To allow a secure operation, follow also the Installation guide described in
chapter 0. Operating the Impression 120RZ without suitable safety aids like