Instruction manual

R
R
R
-
-
-
G
G
G
-
-
-
B
B
B
GLP  German Light Products GmbH (Instruction version 1.26) / from software version 1.72/30) 10
2.3.2 DMX
USITT DMX-512 Standard input/output in 3 pole connectors.
3 pole: Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+]
The DMX- Addressing starts at the DMX- Address [001].
3 The Menu Field
You’ll find the control board on the side of the arm. It allows you to
make all necessary adjustments of the
I
I
M
M
P
P
R
R
E
E
S
S
S
S
I
I
O
O
N
N
.
. With the
Mode-key you get into the main menu. Afterwards you can navigate
through the menu with the Up/Down-keys. Push the Enter-key to get
to the next menu level or to confirm your settings. Select ON/ OFF
function settings with the Up/Down-keys. Confirm and save with the
Enter-key (the display shows OK). Push the Mode-key to cancel the
entry and go back to the main menu.
Mod e
Down
Enter
Up

 
 DOWN - UP

 



 MODE - ENTER 


Level1
Level 2
Level 3
Level 4
Remark
DMX Start
Address 001
Define the DMX start address
Special Manual DMX
Manual control of all system functions
Pan
Manual control for Pan (X-movement)
Speed
Movements
Speed adjustment for Pan/Tilt movements  see
also item below
Pan/Tilt
Movements
Manual control for Pan/Tilt movement
Special
Activate the White- or Full-Power Mode; see also
DMX table
White
Temperature
Manual control for color temperature
Dimmer
Manual control for dimmer
Shutter
Manual control for shutter
Blue
Manual control for blue
Green
Manual control for green
Red
Manual control for red
Color Wheel
Manual control for the color wheel mimic
Tilt
Manual control for Tilt (Y-movement)
Display
Contrast
Adjustment for the Display contrast
Default Set
Resetting all functions to original values
Set Dimme
r
Frequency
Changes PMW frequency between 600Hz and
1200Hz
LED Dimmer
Version
Reads out the current LED dimmer (software) version