Specifications

DLED Par Zoom™

©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com

9. DISPLAY MENU

On-Board System Menu: The Design PAR Zoom™ comes with an easy to navigate system

menu. This next section will detail the functions of each command in the system menu.

LED Control Panel: The control panel located on the base of the fixture allows you to

access the main menu and make all necessary adjustments to the Design Par Zoom™.

During normal operation, tapping the “MENU” key once will access the fixture’s main menu.

Once in the main menu you can navigate through the different functions and access the

sub-menus with the Up and Down buttons. Once you reach a field that requires adjusting,

tap the ENTER button to activate that field and use the UP and Down button to adjust the

field. Tapping the Enter button once more will confirm your setting. Once a setting is saved

the display will briefly readout OK to confirm a new setting has been made and locked into

memory. You may exit the main menu at any time without making any adjustments by

tapping the MENU button.

MENU Button - To access the main menu locate the MENU button on the front of the unit.

Press this button to activate the system menu. Tap the UP button until you reach the function

you wish to change. When you reach the function you wish to change tap the ENTER button

once to select that menu function. When a function is selected, use the UP or DOWN button

to change the function. Once your changes are made tap the ENTER button yet again to

lock the change in the system menu. To exit without making any changes tap the MENU

button.

VALU

A001~XXX

(AXXX)

DMX address setting

SLAV

ON/OFF

(SLAV)

Slave setting

ADDR

RDMX ON/OFF

Change DMX address

via external controller

ALON (AU-A)

Automatic Run in Stand

Alone

AUTO

MAST

(AU-M)

Automatic Run as

Master

MODE

RUN

SOUN ALON (SO-A)

Sound-controlled Run

in Stand Alone