User manual

©Elation Professionals® - www.elationlighting.com - Arena Par CW User Manual Page 11
©Elation Professionals® - www.elationlighting.com - Arena Par CW User Manual Page 12
ENTER.
2. The display will show a number between 0-100. Press the UP
or DOWN buttons to adjust the sound sensitivity. 0 being the
least sensitive and 100 the most sensitive.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to conrm.
BLND - Blackout or Stand By Mode.
1. Press the MENU button until “BLND” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “YES”
is displayed, press ENTER to conm. The xture will now be in
Blackout mode. To deactivate Blackout mode, select “NO” and
press Enter.
LED - With this function you can have the LED display
turn off after 20 seconds.
1. Press the MENU button until “LED” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display On at all
times, or “OFF” so that the LED display turns off after 20 sec-
onds.
3. Press ENTER to conrm.
DISP - This function will reverse the display 180º.
1. Press the MENU button until “DISP” is displayed, press
ENTER.
2. Press the UP button to select “DISP” to activate this function,
or “DSIP” to deactivate this function.
Arena Par CW System Menu
3. Press ENTER to conrm.
TEST - This function will run a self test program.
1. Tap the MENU button until “TEST” is displayed, press ENTER.
2. The xture will now run a self test program. To stop the self
test press either the MENU or ENTER button.
TEMP - With this function you can display the temperature
of the unit.
1. Press the MENU button until “TEMP” is displayed, press
ENTER.
2. The display shows the temperature of the unit. Press MENU
to exit.
FHRS - With this function you can display the running time
of the unit.
1. Press the MENU button until “FHRS” is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER - Use this function to display the Software version of
the unit.
1. Press the MENU button until “VER” is displayed, press
ENTER.
2. The display will show the software version.
Arena Par CW System Menu