User manual

©Elation Professionals® - www.elationlighting.com - Arena Par CW User Manual Page 10©Elation Professionals® - www.elationlighting.com - Arena Par CW User Manual Page 9
Arena Par CW System Menu
System Menu. The Arena Par CW comes with an easy to navigate
system menu. This next section will detail the functions of each com-
mand in the system menu. Please read the next section thoroughly!
To access the main menu press the MENU button. Press the UP or
DOWN buttons until you reach function you wish to change. When
you reach the function you wish to change press the ENTER button.
When a function is selected use the UP or DOWN buttons to change
the function settings. Once your changes are made press the ENTER
button, and then press and hold the MENU button for at least three
seconds to conrm and lock the change into the system memory. If the
MENU button is not pressed and held within eight seconds the xture
will automatically conrm and lock the change into the syste memory.
To exit without making any changes press the MENU button.
ADDR - DMX Address Setting.
1. First set the unit to your desired DMX Channel mode.
2. To set your address, tap either the MENU, UP, or DOWN but-
tons until “ADDR” is displayed, press ENTER. “1” will now be
displayed and ashing.
3. Press the UP or DOWN buttons to nd your desired address.
When you have found your desired DMX address press ENTER,
then press and hold MENU for 3 secs.
4. Connect your DMX Controller.
CHND - This will let select your desired DMX channel mode.
1. Press the either the MENU button until “CHND” is displayed,
press ENTER. Either “1CH” or “2CH” will be displayed
2. Press the UP or DOWN buttons to nd your desired DMX
mode and press ENTER to conm and exit.
SHND - Show mode can be run with sound activity or
with out. For show mode to run without sound activity turn
sound activity off.
1. Press the MENU button until “SHND” is displayed, press
ENTER. The unit will now run its built-in show.
MANU - In this mode you can manually adjust the LED
intensity. You can also activate and control strobing.
1. Press the MENU button until “MANU” is displayed, press
ENTER. “DINN” will be displayed, press ENTER. Use the UP or
DOWN buttons to adjust to your desired intensity. Press ENTER
after the intensity adjustment.
2. After you press ENTER press the UP button and “STRO”
will be displayed. This is the strobe function. If you choose to
activate strobe, press ENTER. Use the UP and DOWN buttons
to adjust the speed of the strobe. Press ENTER once you have
made your adjustments.
3. Once your desired settings are reached do not leave this
mode. Once you leave this mode, all settings will be reset.
4. If you do wish to leave this mode, press the MENU button.
SOUN - Sound Active mode.
1. Press the MENU button until “SOUN” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to activate sound active mode,
or “OFF” to deactivate sound active mode.
3. Press ENTER and then hold MENU for at least 2-3 seconds
to conm.
SENS - Sound sensitivity control.
1. Press the MENU button until “SENS” is displayed, press
Arena Par CW System Menu