Instruction manual

©Elation Professionals® - www.elationlighting.com - Instruction Manual Page 13 ©Elation Professionals® - www.elationlighting.com - Instruction Manual Page 14
Universal DMX Control: This function allows you to use a Elation®
universal DMX-512 controller to create unique programs tailored to your
individual needs. NOTE: Wireless Transmitter sold separately.
1. First, set your desired DMX channel mode. To set the DMX channel
mode see page 7. The Event Cylinder DMX has 4 DMX channel
modes; a 1 Channel Mode, 3 Channel Mode, 4 Channel Mode, and 6
Channel Mode. See pages 14-16 for the DMX modes & traits.
2. After you have set your DMX Channel mode, set your DMX address.
Follow the instructions on page 7 to set the DMX address.
3. Connect your DMX controller to the Wireless transmitter’s DMX
Input.
4. This next step is very important for setting up wireless DMX
connection. Press the MODE button so that “ShoU” is displayed,
and press ENTER. Either “alon” or “dn” will be displayed. Press the
UP or DOWN buttons so that “dn” is displayed and press ENTER.
Immediately after you have pressed ENTER, press the FUNCTION
button on the Wireless Transmitter. Both the LED on the Event
Cylinder DMX and the status LED on the Wireless Transmitter will
begin to flash, indicating that they are both searching for a signal.
5. If the signal connection is successful, the status LED on the trans -
mitter will glow green, and Event Cylinder DMX will display the
DMX address that you set before. NOTE: Once the connection is
successfull, the wireless connection will be available at all times.
6. To clear/stop the signal, Press the MODE button so that “Udrt” is
displayed, and press ENTER. Once you press ENTER “Udrt” will
begin to flash, press ENTER again to clear the signal. If you have
any problems while attempting to set up a Wireless DMX signal,
try clearing a signal.
7. Use the controller’s faders to control the various DMX fixture traits.
This will allow you to create your own programs.
8. For help operating in DMX mode consult the manual included with
your DMX controller.
Event Cylinder DMX Universal DMX Control
Event Cylinder DMX 1 Channel Mode
Channel Value Function
1 SHOWS
0 - 7 BLACKOUT
8 - 31 SHOW 1
32 - 55 SHOW 2
56 - 79 SHOW 3
80 - 103 SHOW 4
104 - 127 SHOW 5
128 - 151 SHOW 6
152 - 175 SHOW 7
176 - 199 SHOW 8
200 - 223 SHOW 9
224 - 247 SHOW 10
248 - 255 SOUND ACTIVE
Channel Value Function
1 RED
1 - 255 0% - 100%
2 GREEN
1 - 255 0% - 100%
3 BLUE
1 - 255 0% - 100%
Event Cylinder DMX 3 Channel Mode
Channel Value Function
1 RED
1 - 255 0% - 100%
2 GREEN
1 - 255 0% - 100%
3 BLUE
1 - 255 0% - 100%
4 MASTER DIMMER
1 - 255 0% - 100%
Event Cylinder DMX 4 Channel Mode