Instruction manual

©Elation Professionals® - www.elationlighting.com - Instruction Manual Page 10©Elation Professionals® - www.elationlighting.com - Instruction Manual Page 9
LED intensity to create your desired color. You can dim
your desired color once it is created and activate and con-
trol strobing.
1. Press the MENU button until “nanu” is displayed, press
ENTER. “RED” will now be displayed, press ENTER. Use the
UP or DOWN buttons to adjust to your desired intensity. Press
ENTER after the intensity adjustment.
NOTE: You do not have to adjust Red rst or adjust it at all,
you can use the UP & DOWN buttons to scroll to the colors
you would like to adjust. The colors that can be adjusted
are Red, Green, & Blue.
2. After you press ENTER then press UP and the unit will scroll
to the next color that can be adjusted. Press ENTER and use
the UP and DOWN buttons to adjust the color.
3. Continue to make adjustments to the colors until your
desired color is reached. After adjusting Blue, press ENTER
then press the UP button.
4. “DINN” will be displayed, press ENTER. This is the master
dimmer control. In this submenu you can adjust the intensity
of your created color. Use the UP and DOWN buttons to adjust
the intensity.
5. Press ENTER once you have adjusted the master dimmer.
Press the UP button and “STRO” will be displayed. This is the
strobe function. If you choose to activate strobe, press ENTER.
Use the UP and DOWN buttons to to adjust the speed of the
strobe, or to turn the strobing off. Press ENTER once you have
made your adjustments.
6. Once your desired color and settings are reached press and
hold the MENU button for at least 3 seconds to conrm and
activate.
SOUn - Sound Active mode.
Event Cylinder DMX System Menu
1. Press the MENU button until “SOUn” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to activate sound active mode,
or “OFF” to deactivate sound active mode.
3. Press ENTER, then press and hold the MENU button for at
least 3 seconds to activate.
SenS - In this mode you can adjust the sound sensitivity.
1. Press the MENU button until “SenS” is displayed, press
ENTER.
2. A number between 0-100 will be displayed. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least
sensitive, and 100 being the most sensitive.
3. When you have found your desired setting press ENTER to
conrm.
Led - With this function you can have the LED display
turn off after 20 seconds.
1. Press the MENU button until “Led” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display On at all
times, or “OFF” so that the LED display turns off after 20 sec-
onds.
3. Press ENTER to conrm. To make the LED display reappear
after it has turned off, press any button.
teSt - This function will run a self test program.
1. Press the MENU button until “teSt” is displayed, press
Event Cylinder DMX System Menu