Instruction manual
Event Cylinder DMX System Menu
Addr - DMX Address Setting.
1. Press the MENU button until “Addr” is displayed, press
ENTER.
2. The current address will now be displayed and ashing.
Press the UP or DOWN buttons to nd your desired address.
When you have found your desired DMX address press ENTER.
3. Please see page 13 to activate DMX control.
Chnd - In this menu you can choose your desired DMX
channel mode. There are 4 DMX Channel Modes to choose
from. Please see page 13 for DMX Control.
1. Press the MENU button until “Chnd” is displayed, press
ENTER. Either “Mod 1” (1 Channel Mode), “Mod 2” (3 Chan-
nel Mode), “Mod 3” (4 Channel Mode), or “Mod 4” (6 Channel
Mode) will be displayed
2. Press the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to conm and exit.
Udrt - This function is used to clear the wireless DMX
signal. Please see page 13 for DMX Control.
ShoU - In this mode you can choose 1 of 10 shows to run.
Shows can run with or without sound activity. This submenu
is also used to set up wireless DMX control. See page 13 for
DMX Control.
1. Press the MENU button until “ShoU” is displayed, press
ENTER.
2. Either “aLon” or “dn” will be displayed. To select a show, press
the UP or DOWN buttons so that “aLon” is displayed, and press
ENTER.
©Elation Professionals® - www.elationlighting.com - Instruction Manual Page 7 ©Elation Professionals® - www.elationlighting.com - Instruction Manual Page 8
3. “Sh X” will now be displayed, “X” representing a number
between 0-10. Programs 1-10 are factory programs, while “Sh
0” is random mode. Press the UP or DOWN buttons to nd your
desired show.
4. When you have found your desired show press ENTER, then
press and hold the MENU button for at least 3 seconds to acti-
vate. After you have set your desired show, it can be changed at
any time using the UP or DOWN buttons.
Fade - This menu will activate the Fade mode.
1. Press the MENU button until “Fade” is displayed, press ENTER.
2. “SP X” will now be displayed, “X” representing a number
between 1-10. This is fade speed adjustment; 1 being the slow-
est fade and 10 being the fastest. Press the UP or DOWN but-
tons to adjust the fade speed to your desire.
3. When you have found your desired fade speed press ENTER,
then press and hold the MENU button for at least 3 seconds to
activate.
CoLr - This menu will color mode and let you select a color
to remain static.
1. Press the MENU button until “CoLr” is displayed, press ENTER.
2. “Co X” will now be displayed, “X” representing a number
between 1-10. Numbers 1-10 are the static colors to choose
from. Use the UP or DOWN buttons to scroll through the 10
colors.
3. When you have found your desired color press ENTER, then
press and hold the MENU button for at least 3 seconds to acti-
vate.
nanu - In this mode you can manually adjust the RGB
Event Cylinder DMX System Menu