User manual

www.elationlighting.com!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!4S!!!!!!!!!!!!!!!!!!!!!!#$%&'!(!)*%+!,-#.!/01203!456
1-8 DMX PORT DISABLED
You can set the Port Status of any the DMX Ports 1-4 as Disabled (DIS). When the Port
Status is set as DIS, the DMX port will be disabled and will not send or receive any data.
Please note that the Framerte/fs option is only available for Output status. The
Secondary and Resend options are only available for the HTP/LTP modes under the
status of Output.
SET ID NO.
Enter into the main menu by pressing the rotary wheel. Turn the rotary wheel to Set ID NO.
option and then press the rotary wheel to enter into its menu window. Press the rotary wheel
to change the ID NO. Turn the rotary wheel clockwise or counter-clockwise to set a new ID,
press the rotary wheel to confirm. Available ID’s are 001 to 255. Turn rotary wheel clockwise
to ENTER and save ID NO.
Set LCD Backlight
Enter into the main menu by pressing rotary wheel, and then turn the rotary wheel to select
the LCD Backlight option and then press the rotary wheel to confirm your selection. You
can select between ON (backlight remains ON) or OFF (backlight turns OFF automatically
after 30 seconds of idle time), by turning the rotary wheel. Confirm your selection and move
to next option by pressing the rotary wheel.