Instruction manual

For example:
A. Move Red work grid to 140.
B. Move Master work grid to 142.
C. The brightness of Red color is
142
255
x
140
=
77.96
1.5 Adjust the brightness by moving the work grid.
1.4 Select an existing pixel address of the selected outport.
In the drop down menu, "Port_pixel_all" means all the pixels existing in selected outport, while
"Node_Pixel_all" means all the pixels existing in selected node.
1.6 Click the "Save" ( ) icon to confirm and save your settings, otherwise all the settings will be invalid.
1.7 Repeat step 1.2~ step1.6 to assign more nodes to control the device.
-24-