Instruction manual

Section_4: DMX Control Mode Setup
In this mode, all scenes/Events(Flash files, Video Files, MPEG Files) are available to be controlled and playback
by addressing DMX address. And user may use DMX values to control the desired scenes. For further information,
please refer to the accompanying table:
Destination Components
Presentation List
All events(Flash files, Video Files,
MPEG Files) which have added will
be listed and appear in the
Destination Components Presentation
List.
Set Starting Address
Source Components
Presentation List
In this option, All events(Flash files,
Video Files, MPEG Files) which have
been copied to the "Scene_lib" folder
will automatically be listed and
appear in the Source Components
Presentation List.
Preview Area
1a. Firstly add all events(Flash files, Video Files, MPEG Files) in the Source Components Presentation List to the
Destination Components Presentation List which you wish to control by DMX. The user can follow these below
simply processes to add.
1.1 Select one event(Flash files, Video Files, MPEG Files) in the Source Components Presentation List which
you wish, and click the "Add" icon to add. The desired one will automatically appear in the Destination
Components Presentation List.
1.2 To repeat the above step to add more events for DMX control.
In this option, it allows up to 85 scenes can be added and controlled.
1.3 Enter an integer number from 1~512 in the "DMX Address" bar to set DMX starting address.
1.4 After your confirmation with these settings, click the "Save" icon to store them.
DMX Channel Selection
Starting Channel
Starting Channel
+1
Starting Channel
+2
DMX Values & Functions
0~127 to Normal Output,
129~255, allow to Blackout.
0~85 to Pause;
86~170 to Play;
171~255 to allow to Stop.
0 ~2, select Scene_1;
3~5, select Scene_2;
6~8, select Scene_3;
........
252~254, select Scene_85
In this option, it allows up to 85 scenes can be added and controlled. Click the "Insert" icon to add the
selected event between two events.
Click the "DEL" icon to delete the selected event.
DMX Channel Selection, DMX Value&Functions Table
Each event is deemed as one scene.
-14-
DMX Trigger function available