Specifications

Elation Professional - www.elationlighting.com - Page 6
12. CARD button:
Press this to switch between the operations for internal storage and the CF card
storage. Correspondent LED “on” means CF card operation is available, while LED
“off” means internal operation is available.
13. SHUTDOWN button:
Press to activate the SHUTDOWN function. (Read through the manual for details)
14. / 15. / 16. PLAY / PAUSE / STOP buttons :
These three buttons are used for the flow control. By pushing one of these buttons a
chosen sequence can be started, stopped, or finished. How the buttons react in the
different modes and what other functions are executed is explained in detail in the
modes chapter.
17. RECORD button:
In PROGRAM mode, the recording of a new sequence can be prepared with the
RECORD button. In order to do so, user should choose a sequence, then push the
RECORD button and start the recording with the PLAY or PAUSE button.
4.2 Rear Panel
PUSH PUSHPUSH
SMPTE OUT SMPTE IN DMX OUT
DMX IN
Made in PRC
DC INPUT:
9-12VDC, 500mA Min
1 PLAY
2 SEQ A
3 SEQ B
4 STOP
5 RECORD
6 PRG-MODE-LED
7 RECORD-LED
8 PLAY-LED
9 GND
1 2 3 4 5 6 7 8 9
Seq Nr
I01
I02
E01
E02
Seq A
0
0
1
1
Seq B
0
1
0
1
1
2
3
4
5
1. SMPTE output / input:
Used to output / input SMPTE signals via this port.
2. DMX output
(5pin / 3pin):
To output relative DMX signals.
3. DMX input
(5pin / 3pin):
To input relative DMX signals.
4. Terminal connector:
Used to connect with external terminals.
5. DC input:
Used to plug in an external power supply (DC 9-12V, 500 mA Min).