Specifications

Elation Professional - www.elationlighting.com - Page 5
4 Control and Functions
4.1 Front panel
1. Power Switch:
Used to switch the main power on or off.
2. CF card port:
This port is for CF card usage.
3. LCD-Display:
Display correspondent menus, settings and values depending on the chosen function.
4. UP button:
Press this button to select correspondent options or increase relative values.
5. NEXT button:
Used to select internal sequences or help to change sequence names.
6. DMX indicator:
Indicates DMX input. When the correspondent LED is “on”, that means DMX input is
effective, while “off” means no signal input.
7. Mode button:
Used to select different modes (
MANUAL, AUTOSTART, DMX MON, DMX TRIGGER,
PROGRAM
and SETUP modes available). Each tap will change the mode once.
8. STARTUP button:
Used to activate the STARTUP function. (Read through the manual for details)
9. 1~4 Sequence buttons:
Used to select one of the possible sequences (I
01~I04).
10. DOWN button:
Press this button to select correspondent options or decrease relative values.
11. ENTER button:
Press this button to confirm your operation or enter the correspondent menu.