User manual

id539903343 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
I.
..
E. Press the FIXTURES select button you have just finished programing (so thallhe respective LEO if off).
F. To program another projector, repeat the steps C - E until all projectors of the scene have been programmed.
G. Press the MIDII ADO button to prepare to store.
H. Press the respechve SCENE button in order to save the first scene. All LEOs wfll blink 3 times, showing the
scene Is stored. In the display window it will show the bank and scene number that is programed.
I. Repeal the steps C - H to program the next scene until the maximum number of scenes - 8 - has been reached.
To leave the program mode. press and hold the PROGRAM bullon for 3 second.The controlier will default to the
BLACK-OUT mode. The
black-out LED will be lit. You can leave the BLACK-OUT mode by pressing the BLACK-OUT
buttton until the black-out LED be off
2.3.2. Checking a bank
Enter programing mode by pressing and holding the PROGRAM button
Select the desired bank via the BANK buttons (BANK UP
I BANK DOWN).
Check every scene
individually by pressing the respective SCENE bulton.
2.3.3. Running a bank
Selecllhe desired bank via the BANK buttons (BANK UP I BANK DOWN).
Press the AUTO
I Del button and the Auto Trigger LED is Illuminated in the display.
Adjust the program speed via the SPEED Fader and the repehl ,on rate via the
FADE TIME Fader.
As an alternative, you can
adjust the program speed by tapping tha TAP SYNC I
DISPLAY button twice. The time interval between the two laps corresponds to the
program speed (up to 10
minutes).
2.3 .•. Editing a bank
e ..
Bank
e ..
~AU 10/D.I .
~ TapSync .
~ Display
Should you notice that a
scene does not correspond to your Imagination, or when programs have to be edited for 8
new stage, it is necessary to modify a scene manually
A. Enter the program mode by pressing and holding the PROGRAM button
for 3 seconds . The Program-LED flashes
in the display.
B. Select the desired bank via
the BANK buttons (BANK UP I BANK DOWN) .
C. Select the desired
scene you want to edit via the SCENE button.
D. Select the desired
projector you want to edit via the FIXTURES select buttons. he respective LED will be lit.
E. Adjust the desired
selllngs(change the projector attributes such as gobos or colors) via the respective channel fa-
ders.
You may need to select channel 9-16 by pressing the PAGE SELECT button. When the LED Ais lit, you can pro-
gram channel
1-8. When the LED B is lit, you can program channelg-16.
F. Press the FIXTURES select button you have just finished editing (so that the respective LEO is oR).
G.
To edit another projector. repeat the steps C - E until all projectors of the scene you want to edit have been edited.
G. Press the MIDI
f ADD button to prepare to store you editing.
H. Press the respective SCENE button in
order to save the edited scene. All LEOs will blink 3 ames, showing the
scene Is edited. In the display window it will show the bank and scene number that is edited.
I. Repeat the steps C· H to program the next scene until the program editing is finished.
To leave the program mode, press and hold the PROGRAM button for 3 second. The controller will default to the
BLACK-OUT mode. The
black-out LED will be lit. You can leave the BLACK-OUT mode by pressing the BLACK-OUT
bultton
untillhe black-out LED be off.
2.3.5. Copy a bank
A. Enter t he program mode by pressing and holding the PROGRAM bullon fo r 3 seconds. The Program-LED flashes
In the display.
·9·