User manual
id539903343 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
A. Enter the program mode
by
pressing and hold the PROGRAM button for 3 seconds. The Program-LED flashes
in
the display.
B. Select the desired bank via the BANK buttons (BANK UP I BANK DOWN).
C. Press the respective SCENE button
to
edit.
D. Adjust the desired seWngs(change the projector attributes such as gobos or colors) via the respective channel
faders.
You
may need
to
select channel 9-16 by pressing the PAGE SELECT button . When the LED A is lit. you can
program channeI1-B. When the LED B is lit. you c
an
program channel 9-16.
E. Press the
MIDII
ADD button to prepare to store .
F. Select the SCENE button you previously selected again.
All
LEOs
will
blink
3
times,
showing
theseenels
edited.
In
the display window it will show the bank and scene number that has been edited.
To
leave the program mode. press and hold the PROGRAM button for 3 second . The controller will default
to
the
BLACK-OUT mode. The black-out LED will
be
lit.
You
can leave the BLACK-OUT mode
by
pressing the BLACK-OUT
buttlon until the black-out LED be
off
.
2.2.4. Delete a
scene
A. Enter the program mode
by
pressing and hold the PROGRAM button for 3 seconds. The Program-LED flashes
in
the display.
B. Select the desired bank via the BANK buttons (BANK UP I BANK DOWN).
~
Auto/Dele
C. Press the respective SCENE button
to
delete.
D. Press and hold
theAUTOI
DEL button to prepare to delete.
F. Select the SCENE button you previously selected again .
All
LEOs
will
blink
3 times,
showing
thescene
Is dele-
ted.
In
the display window it will show the bank and scene number that has been deleted.
The result
of
deleting a scene is actually a value reset
to
0
of
the
DM
X-
value
of
the scene selected. The physicalloca-
tion of the scene remains.
To
leave the program mode. press and hold the PROGRAM button for 3 second. The controller will default to the
BLACK-OUT mode . The black-out LED will be lit.
You
can leave the BLACK-OUT mode by pressing the BLACK-OUT
buttton untilthe black-out LED be
off
.
2.2.5.
Delele
al/
scenes
Caution
: When you select this function. all programmed scenes will
be
irrevocably lost!
A.
Press and hold the PROGRAM button and the BANK DOWN button while disconnecti
ng
the device from the mains.
B. Connect
th
e device
to
the mains again.
All scenes has been deleted.
2.3.
Bank
/
Program
A bank (program) is a sequence
of
different scenes that will
be called
up
one after another.
With this DMX Operator. you can program up
to
30
different
banks with up
to
B scenes each.
I
~
.
:0:
1'
:1
~
e·
Bank
~
eT
The bank number will be shown in the last two digits
in
the display window while you press the BANK buttons (BANK
UP I BANK DOWN).
2.3.1. Creale a
bank
A. Enter the program mode by pressing and holding the PROGRAM button for 3 seconds. The Program-LED flashes
in
the display.
B.
Select the desired bank via the BANK buttons (BANK UP I BANK DOWN).
C. Select the desired projector via the
FIXTURES
select buttons. The respective LED will be lit.
D. Adjust the desired settings(change the projector attributes such as gobos or colors) via the respective channel
faders.
You
may need to select channel 9-16 by pressing the PAGE SELECT button. When the
LEDA
is lit, you can
program channeI1-
B.
When the LED B is lit. you can program channel 9-16.
-B-