User manual

57
2004 software Manual
5.2 Playing with the outputs window
The outputs window makes it possible to visualize in real time the channels level of one page or of
all DMX outputs. Moreover, you will be able to directly change channels settings in most of the
available modes thanks to this same menu.
All channels may be straightly reached "LIVE", as if you were piloting a real lighting desk ! Enjoy !
5.2.1 Display modes
To switch between each display mode you must use the three buttons below :
OUT 1 PAGE : display the levels of the current page channels (before the patch)
DMX 1 PAGE : display the levels of the current page DMX outputs (after the patch)
DMX OUT : display the real levels of all DMX outputs
Three other modes are available :
The first one allows to see only the DMX levels : we can not take the priority. To modify a channel,
we must use one of the following modes. In those cases, we are allowed to modify all channels in
"LIVE".
The first mode allows to see more channels but is less comfortable to use. In case of exceptional
use of this window we recommend to use the first mode but if you frequently use the window it is
easier to do it with the second one.
These two last display modes require more CPU time. This is why we recommend to
stay in normal mode if you do not control channels manually.