User manual

2004 software Manual

4.3.5.2 How to use groups with both main and editor screens

The choice is yours to display or not the "Group" toolbar on the main screen. If you choose to do so,

all you have to do is select "Groups" in the "Window" menu of the 2004 software version or click on

the following button in the standard toolbar:

You can also choose to display or not the "Groups" toolbar in the Editor screen: click on "Display"

menu and then "Groups" toolbar...

Main Screen Mode

There are three different modes existing for using groups. You can switch from one mode to the

other by resorting to the two buttons below. If these two buttons are released, you will have access

to the third mode (default mode).

Default Mode

Any group using will be effective for the selected button (scenes or

switches).

For example, if the "Color red switch) is pressed and that the

"stage left" group is activated, only fixtures belonging to this group

will be allocated the red color.

In similar case, the "group" function will be only applied to this one

and only action.

The "group" function will be applied from now on to each new

action until complete release of the button.

A button (scene or switch) to which the group function is applied will immediately take on the

following aspect:

The button font becomes blue and a small "G" appears at the bottom.