User manual

48
2004 software Manual
Close the editor screen (do not forget to save the modifications). The switch is now ready to be used
and we will add a DIMMER fader on it. To do so, open the "Button settings..." window and go to the
"Dimmer/Speed" tab. First of all, click on "Show the Dimmer fader" to enable the function. Select
"Draw the fader on the bottom" if you want to have the fader under the button name. Then, select
"Use the minimum and maximum levels of each channel" to make the fader working between 100
(minimum programmed) and 200 (maximum) on the channel. See the window below:
The Size function
This function allows to modify easily the size of a movement. Imagine that a scene doing a tilt
movement with your fixture is running. For any reason, you want to reduce the amplitude of the
movement without editing your scene. You must use the SIZE function to do so. You just have to
move the fader on the toolbar while the scene is running and you will see the changes in real-time
on your fixtures.
It is important to know that we can also use the DIMMER and SPEED functions as
global parameters for our page. To do that we must call the "Live toolbar Page" from
the "Page" menu or by clicking with the right button of your mouse on the page title
bar. Make sure that you do not forget the changes you have made from this toolbar
because they have the priority on all the buttons of your page.