User manual

12
2004 software Manual
4.2 Creating our first show
4.2.1 Let us start with 6 SPOT 575
We are about to create our first show with 6
SPOT 575
. We just need to know the DMX address of
our first fixture and the software will be automatically inserting our 6 moving heads with their correct
address. In a few minutes, we will be able to control our fixtures with a real efficiency. Let us start
creating our first page now, and see how easy it is to use our fixtures with
2004 Software
.
Once the software has been started, we must create a page with our 6
SPOT 575
. There is nothing
easier. First, we must launch the "New Page" wizard which will guide us during the creation of our
page. To do so, we must click on the "Page" menu and select "New page" or click on the "Create a
new page" icon from the standard toolbar as shown below.
Then, the following window appears and two choices are possible. We can create a page with the
wizard (1st choice) or create a page manually (2nd choice) for conventional lighting. We must select
the first choice to create our 6 fixtures.