DP-640B No. 24-004-1952-00 Rev 1.0 All Rights Reserved! Elation Professional R 4295 Charter Street Los Angeles CA. 90058 www.elationlighting.
Notes
Technical Specifications Table of Contents Technical Specifications Power Input ..............................................................2x20A, AC 120V~50/60Hz Features ...........................................................................................1 Line cord..................................................................2x12AGWx3C VW-1 105 C Load............................................ 2400W Channels 1~3, 2400W Channels 4~6 General Instruction....................................
Features Troubleshooting Thank you for purchasing the DP-640B hybrid pack. This product includes the following features: Troubleshooting 6 channel hybrid pack with dual Edison sockets per channel. 3 & 5 pin XLR inputs and outputs. Each channel can be assigned to Dim or Switch modes. 4 function LED's for DMX Address, Patch Address, Local Control and Dim/Switch modes. On board Local Control allows for dim intensity adjustment, from 0-100%, for each individual channel. Panic function dip switches.
Operation Guide General Instruction PANIC dip-switches 1~6: This is a 6 channel portable dimmer/pack. Each channel can individually be set to dim or switch as well as accept separate DMX Addresses. For your convenience, each channel can manually be controlled via our simple to use, digital display and function buttons. The Panic function allows you to select desired channels to switch ON constantly via the six dip switch settings. The unit is also supplied with 3 & 5 pin XLR connectors.
Control and Functions Operation Guide Overall Layout Function Mode 4: Dimmer/Switch 1 This menu option allows you to set the pack's channels to dim or switch. Each channel can be individually set to do one or the other. When a channel is set to switch, then that channel will activate when the channel level exceeds 50%. When a channel is set to dim, then that channels intensity can manually be adjusted from 0 to 100%.
Operation Guide Control and Functions Function Mode 3: Local Control (Manual) Data & Power Connections 1 The Local Control option allows for manual control of the packs six channels via the on-board buttons. PANIC ON 1 2 3 4 5 2 2. DMX OUT: 3 & 5 Pin (female) output socket. 6 MD 12 345 6 DMX Address DMX Signal OK Patch Address Local Control Dimmer / Switch MENU 1 2 3 4 5 Press the MENU button until the "Local Control' LED illuminates. The display will read .
Operation Guide Operation Guide *Note: Abbreviations within the display represent the following: A =Address, C=Channel, d = Display, s =Switch. Press the MENU button to navigate through the menu options. Continually pressing the MENU button will loop through the four options as illustrated below. When in each function mode, its LED will illuminate.
