User Manual

!!!"#$%&'()$'*+&')*",(-.
! !!!!!10.............CUEPIX!BLINDER!WW2™!User!Manual!1.0
FIXTURE MENU
OPERATING INSTRUCTIONS
1) MANUAL DIMMING / FLASH
2) SETTING PIXEL FLIP
3) SETTING DIMMER CURVES
4) MASTER / SLAVE MODES
5) DMX MODE
When the display flashes, you can select the desired mode via the UP/DOWN buttons.
The display will shut off and lockout after 30 seconds of no use.
Press and hold MODE button for approx. 10 seconds to unlock display.
MANUAL DIMMING / FLASH:
Select the Manual Dimming by pressing UP/DOWN buttons until DIMMER C1:99 is displayed and then
press ENTER button, then select desired Dimming Value for COB Module 1 (0-99) by pressing UP/DOWN
buttons and press ENTER button and DIMMER C2:99 is displayed and then select desired Dimming Value
for COB Module 2 (0-99) by pressing UP/DOWN buttons and press ENTER and DIMMER F:00 is displayed
and ten select desired Flash Value for both COB Module (0-99) by pressing UP/DOWN buttons and press
ENTER.