Spec Sheet

Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the
use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own
responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names are registered trademarks.
Elatec GmbH
Lilienthalstr. 3
82178 Puchheim
Germany
Phone:
[phone]
Fax:
[phone]
info-
[e-mail]
www.elatec-
rfid.com
© 2014 Elatec GmbH – DocRev8 – 02/2014
Technical Data
4)
Frequency
125kHz
, 134.2kHz (LF) / 13.56MHz (HF)
Housing
Material
ABS UL94-V0, colour black or white
Dimensions
(
L x W x H)
Desktop
Reader: 88mm x 56mm x 18mm / 3.5inch x 2.2inch x 0.7inch
OEM
Board: 76mm x 49mm x 14mm / 3.0inch x 1.9inch x 0.6inch
Power Supply
4.3V
..5.5V via USB or RS232; RS232 requires 5V external power supply; via connector CNB 3.3V +/- 5%
Current Consumption
RF field
off: 20mA / Cyclic Operation: 2mA
2)
/ Power down Mode: 10µA
2)
RF field
on: 120mA typically
Temperature Range
Operating:
-25°C up to +80°C (-13°F up to +176°F)
Storage:
-45°C up to +85°C (-49°F up to +185°F)
Read
- / Write Distance
Up
to 100mm / 4inch (depending on transponder)
HOST Interface
USB
, RS232, serial 5V CMOS TTL, I²C, SPI
2)
, Clock/Data
3)
, Wiegand
3)
, CAN
2)3)
OS Support
Windows
XP, Vista, 7 (32-/64-bit), 8, Linux
Transmission Speed
Host:
USB: Full speed (12Mbit) – RS232: up to 115.200baud
Air:
up to 848kbit/s
Modes of Operation

USB key board emulation – USB virtual COM port – Transparent (direct chip-commands support)

CCID and PC/SC 2.01
1)
Relative Humidity
5
% to 95% non-condensing
Supported
Transponders
Standard

125kHz / 134.2kHz: 4100, 4102, 4200
5)
, AWID, CASI-RUSCO, HITAG 1
6)
, HITAG 2
6)
, HITAG S
6)
, Keri, Miro,
Pyramid, TIRIS/HDX, UNIQUE, FDX-B, Q5, TITAN (4x50), T55x7, ZOODIAC
Optionally, in consideration: 4305, Cardax, IDTECK

13.56MHz / ISO14443A: MIFARE Classic 1k & 4k, Mini, DESFire EV1, Plus S&X
7)
, Pro X
7)
, SmartMX
7)
,
Ultralight, Ultralight C, SLE44R35, SLE66Rxx (my-d move)
7)
, LEGIC Advant
5)
, PayPass
7)

13.56MHz / ISO14443B: Calypso
7)
, CEPAS
7)
, HID iCLASS
5)
, Moneo
7)
, PicoPass
7)
, SRI512, SRT512, SRI4K,
SRIX4K

13.56MHz / ISO15693: EM4x33
7)
, EM4x35
7)
, HID iCLASS
5)
, ICODE SLI, LEGIC Advant
5)
, M24LR16/64,
Tag-it, SRF55Vxx (my-d vicinity)
7)
, PicoPass
7)

13.56MHz / ISO18092 / NFC: NFCIP-1: Active and passive communication mode, Peer-to-Peer, NFC Forum
Tag Type 1-4, Sony FeliCa
6)
Version P
Standard
+ Cotag, G-Prox
8)
, HID Prox, Honeywell NexWatch, Indala, ioProx
Version PI
Version P + HID
iCLASS (CSN and Facility Code)
Certifications
CE
, R&TTE, RoHS-II compliant, FCC, IC, ACA, VCCI, SRRC
2)
, KCC, CFT, ANATEL
MTBF
500.000
hours
Weight
Approx
. 20 g (without housing)
Order Code
OEM
Board
USB
black / white
RS232
black / white
Standard
ART14187
ART14188 / ART14189
ART14190
/ ART14191
Version P
ART14763
ART14765
/ ART14767
ART14769
/ ART14771
Version PI
ART14764
ART14766 / ART14768
ART14770
/ ART14772
1)
In Preparation
2)
On Request Only
3)
External Interface Required
4)
Target Specification
5)
UID Only
6)
Encryption Not Supported
7)
UID/PUPI Only, Read/Write On Request
8)
Hash Value Only
Accessories
Order Code
Snap
-in holder
ART13512 black,
ART15344
white
Bracket Holder
ART15203 black,
ART15235 white
ART11493
USB cable 200cm/78.74inch
ART13488 USB cable 45cm/17.72inch
ART13829 USB cable 120cm/47.24inch
ART14269 USB
cable
mini 12cm/4.72inch
ART12240
RS232 cable 200cm/78.74inch
Order Code
ART14712 Power Supply (EU)
ART14714 Power Supply
(AU)
ART14713 Power Supply
(US)
ART14715 Power Supply
(UK)
Drawing/Pin Out
Refer to document DS_TWN4 Reader Family
Pinouts