Manualshelf

Installation Guide

ManualsBrandsElastilon ManualsKitchenStrong 3.25 ft. Wide x 82.02 ft. Long Self Adhesive Hardwood Floor Install System (Covers 269.10 sq. ft. x 6 roll/skid)
11121314151617181920
Elastilon Product Manual
~ 17 ~
Board Replacement
Instructions
Simple step by step instructions on how to replace damaged boards.
Step 1:
Use a circular saw to make several cuts on the board that is to be replaced. The correct depth of the saw
blade should be double-checked before cutting. Ideally, a 24-tooth saw blade is used. Note that the
undamaged floor is protected by a piece of cardboard. To further protect the floor, the bottom of the
circular saw could be covered with tape. The saw is used to make two long cuts to the outer edge of each
board. (Cut in 3/8 inch from each side of the board.
Step 2:
Make several diagonal cuts between the two parallel cuts in each board, being careful not to cut into
surrounding boards
.