User`s guide

VBN gateway and Network Services System switch configuration 5-3
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 5-1
Provisioning the VBN gateway and Network Services
System switch
Use this procedure to provision the InterProxy ETH 1 interface as VBN
gateway and Network Services System switch.
Note: See Chapter 7, “Provisioning the Ethernet-VBN switches and ports”
for more information about the general requirements for Ethernet switch
provisioning and the Network Services System function in an Ethernet-
VBN architecture.
Action
Step Action
1 From the YesWare Main Menu, choose Port Manager.
The Port Manager menu appears.
2 In the Ethernet Switch and Port Provisioning section, select Add/Search
Switch Address.
3 Click the Search
button in the Switch Address Configuration dialog.
4 To prevent entering a duplicate IP address, determine if the InterProxy
ETH 1 IP address has been pre-provisioned. If the ETH 1 IP address has not
been provisioned, add the address as shown in Figure 5-1.
Figure 5-1
Switch Address Configuration dialog with default ETH 1 IP address
—continued—