User`s guide

4-8 InterProxy VBN configuration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Network Mask -
network to
exclude
This is optional. If you specify an IP address for the second logical subnet (see
previous field), you must also specify a network mask.
Check if network
utilizes proxy arps
Turn this option on if the network has end-systems using proxy address resolution
protocol. This prevents network conflicts caused by the InterProxy attempting to
serve traffic meant for the local network router. It is recommended the Proxy Arp is
enabled.
InterProxy
Service
The default setting for this field is Off
to prevent a network outage caused by
accidentally connecting the ETH 1 port to the host LAN. This option must be turned
On
to provide InterProxy service.
CAUTION
If this function is not turned On
, InterProxy service will not function.
Users on the ETH 1 system will be prevented from routing through
the InterProxy and gaining access to the ETH 0 host network.
Remove Routes
From Firewall
The amount of time (in seconds) the YWS system waits before removing an
unused route from the firewall rules.
Number of
Subprocesses to
Remove Routes
From Firewall
The number of subprocess cycles that the YWS system waits before removing an
unused route from the firewall rules.
—END-OF-TABLE—
Table 4-1
InterProxy Configuration Page form entries
Form Entry Description