User`s guide

3-16 YesWare Server host network configuration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 3-3 (continued)
Setting the DNS nameserver(s) for the YWS
Step Action
3 To ad d
a nameserver to the beginning of the list of existing nameserver
addresses, type nameserver front
at the command prompt (NSS#>), and
press <ENTER>. The system should appear similar to the following:
4 To add
a nameserver to the end of the list of existing nameserver addresses,
type nameserver last
at the command prompt (NSS#>), and press
<ENTER>. The system should appear similar to the following:
5 To re mov e
a nameserver from the list of existing nameserver addresses, type
nameserver del
at the command prompt (NSS#>), and press <ENTER>. The
system should appear similar to the following:
6 Configure the InterProxy to support the VBN as described in Chapter 4,
“InterProxy VBN configuration.”
STOP
You have completed this task.