User`s guide

YesWare Server host network configuration 3-13
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 3-2
Setting the YWS date and time
This procedure explains how to use the EON date command to set the date and
time for the YWS.
Requirements
To perform this procedure, you need the following:
• a connection to the YWS ETH 0 network interface using one of the
methods described in “YesWare Server console connection methods” on
page 3-4. host name for the YWS
Action
Step Action
1 Login to the YWS (the steps for logging into the YWS are presented in
Procedure 3-1 on page 3-9).
2 At the command prompt (NSS#>), type date
and press <ENTER>. The
system should appear similar to the following:
3 Type y
and press <ENTER>. The system should appear similar to the
following:
—continued—