User`s guide

YesWare Server host network configuration 3-11
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 3-1 (continued)
Configuring the YWS host network interface
Step Action
6 Enter the valid network mask (subnet) address assigned to the YWS ETH 0
network interface. The system should appear similar to the following:
7 Enter the valid gateway IP address assigned to the YWS ETH 0 network
interface. The system should appear similar to the following:
8 Enter the host name assigned to the YWS ETH 0 network interface. If the
YWS will use the Domain Name System (DNS), the YWS must have a valid
DNS host name. The system should appear similar to the following:
—continued—