User`s guide

3-10 YesWare Server host network configuration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 3-1 (continued)
Configuring the YWS host network interface
Step Action
The EON Configuration Manager "welcome" screen and command prompt
appear as follows:
4 At the command prompt (NSS#>), type configure
and press <ENTER>. The
system displays the following:
5 Enter the valid host network IP address assigned to the YWS ETH 0 network
interface. The system should appear similar to the following:
—continued—