User`s guide

3-2 YesWare Server host network configuration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
YesWare Server
The YWS is used to provision and manage services to the YesWare system
infrastructure and clients. The YWS resides as a standard "host" on a local
TCP/IP Ethernet host network.
Figure 3-1 shows the YWS unit.
Figure 3-1
YesWare Server unit
YWS functional components
The YWS unit has the following functional components:
• two Ethernet 10Base-T NICs (ETH 0 and ETH 1)
• two RS-232 serial ports (COM1 and COM2)
• 110/120 V AC power connector
• monitor and keyboard connectors
Figure 3-2 on page 3-3 shows the component connections on the back of the
YWS unit. Table 3-1 on page 3-3 describes the function of each component.
YesWare terminology - ETH 0 and ETH 1
The YWS contains two Ethernet 10Base-T network interface cards (NICs) called
ETH 0 and ETH 1 (see Figure 3-2 on page 3-3). The ETH 0 interface connects the
YWS to the host network. The ETH 1 interface connects YesWare clients to the
YWS for access to YesWareís InterProxy services.
Front View
Back View