User`s guide

Remote YesWare Management using SNMP A-25
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure A-2
Monitoring and Changing the Status of the SNMP
Proxy Agent
The SNMP Proxy Agent retrieves statistics about the operation and
performance of modems attached to the network. If you do not plan to use the
SNMP information generated by the Proxy Agent, you may want to stop the
Proxy Agent. This procedure explains how to start, stop, and monitor the status
of the SNMP Proxy Agent.
Background
The YesWare SNMP Proxy Agent supports the SNMP operations listed in the
following table:
Table A-14
SNMP Operations
You can test the supported SNMP operations from your SNMP network
management station.
—continued—
SNMP Operation Description
SNMP GET - Transmit Speed Returns the modem Transmit Speed variable.
SNMP GET - Receive Speed Returns the modem Receive Speed variable.
SNMP GET - Transmit Byte Count Returns the modem Transmit Byte Count
variable.
SNMP GET - Receive Byte Count Returns the modem Receive Byte Count
variable.
SNMP GET - Firmware Revision Returns the modem Firmware Revision
variable.
SNMP GET/SET - Broadcast
Storm
Returns or sets the modem Broadcast Storm
variable.
SNMP GET/SET - Maximum
Speed
Returns or sets the modem Maximum Speed
variable.
SNMP GET/SET - VC Table Returns or sets VC Table
SNMP TRAP -
modemAgentColdStartAlarm
Autogenerates signal when the SNMP agent
is started.
SNMP TRAP - modemDownAlarm Autogenerates signal when the modem link is
down.