User`s guide

A-24 Remote YesWare Management using SNMP
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure A-1 (continued)
Configuring SNMP
Requirements
To perform this procedure, you need the following:
• The EtherLoop MIB file has been obtained from Elastic Networks. This
file is named enelmdm0.mib and is distributed by Elastic Networks on a
3.5” floppy disk.
Action
Step Action
1 Load the enelmdm2.mib file into an SNMP network management station on
the network (follow the instructions provided with your network management
software).
2 From the YesWare Main Menu, choose NSS Maintenance.
The NSS Maintenance menu appears.
3 Click SNMP Setup.
The SNMP setup dialog appears.
4 Enter the Trap IP address.
Do not change TIMEOUT or POLLTIME unless you are directed to do so by
your Elastic Networks technical support representative.
5 Click Update.
STOP
You have completed this task.