User`s guide

A-20 Remote YesWare Management using SNMP
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
MIB II SNMP Group MIB
The EtherLoop SNMP Agent supports the SNMP group from the MIB II
standard MIB. MIB II is a standard MIB defined by RFC 1213. . (For
additional information on MIB II refer to the RFC). The MIB II SNMP group
defines objects that show SNMP protocol usage and statistics for the SNMP
Agent. The objects are detailed in Table A-13.
Table A-13
MIB II SNMP Group Objects
Object Name Description Access Syntax
snmpInPkts The total number of SNMP Messages which were
passed from the SNMP protocol entity to the
transport service.
read-only Counter
snmpOutPkts The total number of SNMP Messages which were
passed from the SNMP protocol entity to the
transport service.
read-only Counter
snmpInBadVersions The total number of SNMP Messages which were
delivered to the SNMP protocol entity and were
for an unsupported SNMP version.
read-only Counter
snmpInBadCommunityNa
mes
The total number of SNMP Messages delivered to
the SNMP protocol entity, which used a SNMP
community name not known to said entity.
read-only Counter
snmpInBadCommunityUs
es
The total number of SNMP Messages delivered to
the SNMP protocol entity, which represented an
SNMP operation, which was not allowed by the
SNMP community named in the Message.
read-only Counter
snmpInASNParseErrs The total number of ASN.1 or BER errors
encountered by the SNMP protocol entity when
decoding received SNMP Messages.
read-only Counter
snmpInTooBigs The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field is `tooBig'.
read-only Counter
snmpInNoSuchNames The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field is
`noSuchName'.
read-only Counter
snmpInBadValues The total number of SNMP PDUs which were
delivered to the SNMP protocol entity and for
which the value of the error-status field is
`badValue'.
read-only Counter
—continued—