User`s guide

A-8 Remote YesWare Management using SNMP
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Table A-5
MIB variables for EtherLoop Modem CO Id and CPE Id tables
Object Name Description Access Syntax
IdMdmIndex The index for each modem interface. The index
remains constant from one initialization of the
subagent to another. It extends across all
tables and uniquely identifies all modems.
read-only Integer32
ModemLinkStatus The current link status of this modem. read-only INTEGER
up
down
ModemPortStatus
The current link status of the modem. The value of
this
variable relates whether the modem's
ethernet port is
enabled or disabled. The current
value of this variable is read from the modem and is
updated every poll interval. This variable is for CPE
modems only.
read-write INTEGER
(1) enabled
(2) notEnabled
ModemPhyAddr The physical (MAC) address for this modem. read-only OCTET
STRING (size
(6))
ModemNetAddr The network (IP) address for this modem. read-only DisplayString
ModemType The type of modem.
note: for CO modems – ELMO-8 or ELMO-120
for CPE modems – CPE
read-only DisplayString
ModemPort The port number for this CO modem. CO
modems support up to 12 CPE modems.
Note: This field is not displayed in the CPE Id
table.
read-only Integer32
ModemLocation The location of this modem. read-only DisplayString
ModemFirmware The current firmware version of this modem. read-only DisplayString
ModemTrapStatus The status of sending traps for this modem. If
the trapStatus variable in the modemSysTable
is set to trapsOff, the value of this field is not
active. Descriptions for the options are given
below.
trapsOn– all traps are on (enabled) for this
modem.
trapsOff – all traps are off (disabled) for this
modem.
modemDownTrapOff – the modemDown trap
is off (disabled) for this modem. Other traps for
this modem are enabled.
read-write INTEGER
trapsOn
trapsOff
(3)
modemDownTr
apOff