User`s guide

Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
A-1
Remote YesWare Management using
SNMP A-
This chapter describes the use of the YesWare SNMP Agent and its supported
MIBs. The purpose of YesWare SNMP is to provide Simple Network
Management Protocol (SNMP) support to remotely monitor and configure
YesWare EtherLoop and Ethernet components.
The YWS Server does not contain an SNMP "Network Manager." EtherLoop
SNMP Management tasks are performed on a separate Network Management
Station (NMS) using third-party Network Managers (such as HP OpenView)
that support the SNMP protocol.
Chapter Contents
This chapter includes the following information.
Chapter task list
This chapter includes the following tasks.
Topic See
YesWare SNMP components page A-2
Using YesWare SNMP page A-3
YesWare EtherLoop MIB page A-4
Example SNMP Network Manager with EtherLoop MIB page A-5
EtherLoop Traps page A-13
MIB II System Group MIB page A-18
MIB II SNMP Group MIB page A-20
Procedure Task See
A-1 Configuring SNMP page A-23
A-2 Monitoring and Changing the Status of the SNMP
Proxy Agent
page A-25