User`s guide

14-6 Using EtherCraft
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Check Speeds
Use this function to check the transmit speeds of selected client or server
modems. You can display the following values for training results based on
training at different speeds.
Type of modem—client or server modem.
Speeds—shown using codes to represent QAM16 and QPSK values
Mac address for the modem along with its training counts—training counts
are interpreted using codes to indicate the results of training at different
speeds
Access this function from the EtherCraft page by clicking the Check Speeds
button. Figure 14-1 shows the Check Speeds page.
Figure 14-1
EtherCraft Check Speeds page