User`s guide

13-22 YesWare security and administration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 13-9
Configuring NTP (network time protocol)
Use this procedure to edit the list of clock synchronization servers that can be
used to keep your system clock accurate. This procedure is optional; Elastic
Networks provides a set of default values for NTP configuration which should
be adequate for most installations.
Action
Step Action
1 From the YesWare Main menu, choose NSS Maintenance.
2 Click Set Xntp information.
The ntp dialog appears.
Figure 13-14
NTP dialog
The first three entries are public Internet servers. The last entry is the internal
clock address for your computer; this address is used only if the none of the
timing servers can be found. You may change any of the first three entries,
but do not change the last entry unless directed to do so by your Elastic
Networks technical support representative.
3 Edit the server addresses as needed and click Update.
STOP
You have completed this task.