User`s guide

13-6 YesWare security and administration
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 13-2
Restricting web access to the YWS
Use this procedure to restrict access to the YWS web interface by defining a
list of valid subnets. If this function is used, only hosts with IP addresses within
one of the defined subnets are allowed access to the YWS. By default, the
system does not restrict any hosts.
If you are unfamiliar with subnet addressing, contact your LAN administrator
for assistance with this procedure.
Action
Step Action
1 Using a PC web browser, browse to the IP address configured for the ETH 0
interface, and login to the YWS.
2 From the YesWare Main Menu, select the InterProxy module and click the
Configure Remote Access
link.
The Remote Management Connection Interface dialog appears as shown
below.
Figure 13-4
Remote Management Connection Interface dialog
—continued—