User`s guide

Providing visitor printing services 12-3
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Print Services module functions
Figure 12-2 shows the functions on the Print Services main page. Table 12-1
describes the purpose of each of these functions.
Figure 12-2
Print Services main page
Table 12-1
Print Services module functions
Function Description
Configure
Printer(s)
This function sets the printer name, Network IP address, location,
and space for descriptive comments about the printer.
Configure Printer
Rates
This function sets the rates charged for printing services. The
default rate is 0.00.
Map Printer(s) to
Rooms
This function links the visitor rooms to the configured printers,
allowing the administrator to set rates specific to each printer.
Configure Print
Service
This function allows the administrator to turn visitor printing
services on or off (system-wide). The default setting is "Off."
Customer Print
Page
This function is used by visitors for printing services over ETH 1,
and is not reachable from the ETH 0 side of the network.
View Printer
Spools
This function allows the administrator to view pending print jobs
in the print queue.