User`s guide

11-10 YesWare conference room and meeting services
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 11-3
Configuring visitor computers for Conference Room
Billing
Use this procedure to configure the visitor computers to use Conference
Scheduler services and Conference Room Billing.
Note: This procedure presents the visitor configuration using a Windows
95 PC. The configuration requirements of other network operating systems
will vary, but the basic procedure should be the same.
Requirements
This procedure requires the following:
• Visitor computer with an Ethernet 10Base-T network interface card (NIC)
and networking capabilities ("Network Neighborhood") installed
• TCP/IP protocol specified in the visitor computer Network/Configuration
settings dialog and used by the Ethernet NIC
• "Reservation Receipt" generated by the Meeting Room Scheduler as
described in Procedure 11-2 on page 11-6
Action
Step Action
1 Right-click on the Network Neighborhood icon on the visitor PC and select
"Properties" from the pop-up menu. The Network dialog appears with the
Configuration tab open as shown in Figure 11-7.
Figure 11-7
Network dialog and Configuration tab
—continued—