User`s guide

YesWare conference room and meeting services 11-5
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 11-1 (continued)
Configuring Conference Room Billing
Step Action
4 Complete the Conference Room Network Configuration dialog according to
Table 11-1.
5 Click the "Submit" button to configure the Conference Scheduler network.
STOP
You have completed this task.
Tab le 11-1
Conference Room Network Configuration dialog settings
Field Entry Description
Network Gateway
Address
Enter the IP address of the network gateway used by the host
network to access the WAN. This address is typically the first
addressable
IP address in the range.
For example, in the Class C IP address range 172.17.10.0-
172.17.10.255, the gateway address would typically be
172.17.10.1.
Note: Do NOT enter the IP address of ETH 0 in this field.
ETH 0 serves only as an "internal" gateway for the ETH 1:0
subnet, and cannot serve as a LAN gateway.
Netmask Enter the network mask for the Conference Scheduler subnet.
This address is typically 255.255.255.0, 255.255.0.0, or
255.0.0.0.
Network Enter the address of the Conference Scheduler subnet. All
visitor IP addresses generated and used by the Conference
Scheduler will come from this subnet.
This address is typically the first
IP address in the range. This
address is typically the first addressable
IP address in the
range. For example, in the Class C IP address range
172.17.10.0-172.17.10.255, the network address would
typically be 172.17.10.0.
Broadcast Address Enter the broadcast address for the Conference Scheduler
subnet.
This address is typically the last
IP address in the range. For
example, in the Class C IP address range 172.17.10.0-
172.17.10.255, the broadcast address would typically be
172.17.10.255.