User`s guide

11-4 YesWare conference room and meeting services
Software Release 2.30 YesWare Applications User’s Guide 08-01016-01
Procedure 11-1
Configuring Conference Room Billing
The YesWare/LAN administrator must use this procedure to configure the
network used by the Conference Scheduler to provide IP-based conference
services.
Requirements
To set up the conference network using the Conference Scheduler, the
YesWare/LAN administrator or service provider must provide the following:
• an available subnet with a range of static, Internet-routable IP addresses
• network and computer security plan for system visitors
Action
Step Action
1 Add a route to the router that maintains the Conference Scheduler subnet
(ETH 1:0) to use the ETH 0 interface as its gateway.
2 Login to the YesWare Server and select the Conference Scheduler module
from the main menu.
3 Select the Configure Conference Room Network
function to launch the
Conference Room Network Configuration dialog. Figure 11-2 shows this
dialog with the default network settings.
Figure 11-2
Conference Room Network Configuration dialog
—continued—